Not releasing licenses...

[Jon Rizzo]

Has anybody else here had a problem with FlexLM not releasing licenses?
What I mean is that at any given time, 20-40% of our licenses are being held
by FlexLM for several days after the user has exited out of AutoCAD.
Restarting the license manager clears out all of the improperly held
licenses, but a much better solution would be for the license manager to
release licenses when it is supposed to. Does anybody know why this happens
or how to prevent it? Does this happen to anyone else, or is it just us?



Jon Rizzo
Langan Engineering and Environmental Services, Inc.

[jerry milana (Autodesk Co]

Jon,

This is usually caused by ungraceful termination of the licensed product or
a serious packet loss problem on a network. In either case it is best to
fix the cause rather than the symptom when the numbers are as high as you
describe them. The symptom can be helped by setting a timeout value. If
you search the Autodesk
Knowledge base for AutoCAD TIMEOUT document TS67304 should be listed at the
top and should help you implement this

--
Jerry Milana,
Autodesk Consulting.

"Jon Rizzo" <jrizzo at langan dot com> wrote in message
news:41a23a96$1_1@newsprd01...

Has anybody else here had a problem with FlexLM not releasing licenses?
What I mean is that at any given time, 20-40% of our licenses are being
held
by FlexLM for several days after the user has exited out of AutoCAD.
Restarting the license manager clears out all of the improperly held
licenses, but a much better solution would be for the license manager to
release licenses when it is supposed to. Does anybody know why this
happens
or how to prevent it? Does this happen to anyone else, or is it just us?



Jon Rizzo
Langan Engineering and Environmental Services, Inc.

[Jon Rizzo]

If you can find a way to stop AutoCAD & it's verticals from "terminating
ungracefully" I'm all ears. I've been trying for years. :-)

Thanks for the tip(s).

Jon



"jerry milana (Autodesk Consulting)" <milanaj@autodesk.com> wrote in message
news:41a2db8d$1_1@newsprd01...

Jon,

This is usually caused by ungraceful termination of the licensed product
or
a serious packet loss problem on a network. In either case it is best to
fix the cause rather than the symptom when the numbers are as high as you
describe them. The symptom can be helped by setting a timeout value. If
you search the Autodesk
Knowledge base for AutoCAD TIMEOUT document TS67304 should be listed at
the
top and should help you implement this

--
Jerry Milana,
Autodesk Consulting.

"Jon Rizzo" <jrizzo at langan dot com> wrote in message
news:41a23a96$1_1@newsprd01...

Has anybody else here had a problem with FlexLM not releasing licenses?
What I mean is that at any given time, 20-40% of our licenses are being
held
by FlexLM for several days after the user has exited out of AutoCAD.
Restarting the license manager clears out all of the improperly held
licenses, but a much better solution would be for the license manager to
release licenses when it is supposed to. Does anybody know why this
happens
or how to prevent it? Does this happen to anyone else, or is it just
us?



Jon Rizzo
Langan Engineering and Environmental Services, Inc.

[Sa¹o ©libar]

My client have same problem with licenses that don't release:



Users of 46600MAP_2005_0F: (Total of 4 licenses issued; Total of 4
licenses in use)

"46600MAP_2005_0F" v1.000, vendor: adskflex
floating license

Bogdan R-Rojc R-Rojc (v1.000) (s-iei/27000 721), start Wed 11/24 13:37
Katarina r-katarina r-katarina (v1.000) (s-iei/27000 322), start Wed
11/24 9:04
POMOC R-pomoc2 R-pomoc2 (v1.000) (s-iei/27000 138), start Tue 11/23
11:40
katarina r-katarina r-katarina (v1.000) (s-iei/27000 408), start Thu
11/11 8:17




What ways are to release licenses that are not in use, from the server.

Is stop/start server only way? I sugessted to look under task
manager/processes for acad.exe, but there was only one for computer
"Katarina".



Sa¹o ©libar

SL-King d.o.o.







"jerry milana (Autodesk Consulting)" <milanaj@autodesk.com> wrote in message
news:41a2db8d$1_1@newsprd01...

Jon,

This is usually caused by ungraceful termination of the licensed product
or
a serious packet loss problem on a network. In either case it is best to
fix the cause rather than the symptom when the numbers are as high as you
describe them. The symptom can be helped by setting a timeout value. If
you search the Autodesk
Knowledge base for AutoCAD TIMEOUT document TS67304 should be listed at
the
top and should help you implement this

--
Jerry Milana,
Autodesk Consulting.

"Jon Rizzo" <jrizzo at langan dot com> wrote in message
news:41a23a96$1_1@newsprd01...

Has anybody else here had a problem with FlexLM not releasing licenses?
What I mean is that at any given time, 20-40% of our licenses are being
held
by FlexLM for several days after the user has exited out of AutoCAD.
Restarting the license manager clears out all of the improperly held
licenses, but a much better solution would be for the license manager to
release licenses when it is supposed to. Does anybody know why this
happens
or how to prevent it? Does this happen to anyone else, or is it just us?



Jon Rizzo
Langan Engineering and Environmental Services, Inc.

[Jon Rizzo]

Stopping and starting the server works fine...it doesn't kick out existing
users if you restart it immediately. I was more interested in a way to stop
it from happening in the first place...

Jon



"Sa¹o ©libar" <saso@sl-king.com> wrote in message
news:41a48f95_3@newsprd01...

My client have same problem with licenses that don't release:



Users of 46600MAP_2005_0F: (Total of 4 licenses issued; Total of 4
licenses in use)

"46600MAP_2005_0F" v1.000, vendor: adskflex
floating license

Bogdan R-Rojc R-Rojc (v1.000) (s-iei/27000 721), start Wed 11/24 13:37
Katarina r-katarina r-katarina (v1.000) (s-iei/27000 322), start Wed
11/24 9:04
POMOC R-pomoc2 R-pomoc2 (v1.000) (s-iei/27000 138), start Tue 11/23
11:40
katarina r-katarina r-katarina (v1.000) (s-iei/27000 408), start Thu
11/11 8:17




What ways are to release licenses that are not in use, from the server.

Is stop/start server only way? I sugessted to look under task
manager/processes for acad.exe, but there was only one for computer
"Katarina".



Sa¹o ©libar

SL-King d.o.o.







"jerry milana (Autodesk Consulting)" <milanaj@autodesk.com> wrote in
message
news:41a2db8d$1_1@newsprd01...
Jon,

This is usually caused by ungraceful termination of the licensed product
or
a serious packet loss problem on a network. In either case it is best
to
fix the cause rather than the symptom when the numbers are as high as
you
describe them. The symptom can be helped by setting a timeout value.
If
you search the Autodesk
Knowledge base for AutoCAD TIMEOUT document TS67304 should be listed at
the
top and should help you implement this

--
Jerry Milana,
Autodesk Consulting.

"Jon Rizzo" <jrizzo at langan dot com> wrote in message
news:41a23a96$1_1@newsprd01...

Has anybody else here had a problem with FlexLM not releasing licenses?
What I mean is that at any given time, 20-40% of our licenses are being
held
by FlexLM for several days after the user has exited out of AutoCAD.
Restarting the license manager clears out all of the improperly held
licenses, but a much better solution would be for the license manager
to
release licenses when it is supposed to. Does anybody know why this
happens
or how to prevent it? Does this happen to anyone else, or is it just
us?



Jon Rizzo
Langan Engineering and Environmental Services, Inc.

[mr_nick]

I had a problem with this happening to me on a few of our servers. Over a period of weeks, the available licenses became less and less meaning we had to keep restarting the server. I then set the TIMEOUT feature to 15 minutes and when I did a reread - not a restart, and checked the debug log 7 licenses had instantly dropped back in - oddly enough all from the same user. Whether is was something to do with the way this user was shutting down AutoCAD or something I'm not sure, but since the TIMEOUT has been set, we've had no further issues with dwindling license counts.