How to get MAC address

[Stanley]

Anybody knows how to get network adapter's MAC address?

Thanks.

[Mark Evinger]

From console of machine, open dos prompt and run

ipconfig /all

That will give a screen full of info, including the physical address (the
MAC address) and IP address...


Mark Evinger

"Stanley" <KW_Chan@FengChuan.com.hk> wrote in message
news:419163dc_3@newsprd01...

Anybody knows how to get network adapter's MAC address?

Thanks.

[Efim Tetelman (Autodesk,]

Hi,

do you need MAC address for Network License? If yes you need to run LMTOOLS
and check not MAC address, but Ethernet address.

Regards,
Efim
"Stanley" <KW_Chan@FengChuan.com.hk> wrote in message
news:419163dc_3@newsprd01...

Anybody knows how to get network adapter's MAC address?

Thanks.

[Bert Swerza]

In windows xp (i think it is standard) start a command prompt and type
GETMAC.

you can also get the tool from
http://www.microsoft.com/windows2000...g/getmac-o.asp

more options if you type GETMAC/?
you have the options for remote systems, etc

hope this helps

Swerza

"Stanley" <KW_Chan@FengChuan.com.hk> wrote in message
news:419163dc_3@newsprd01...

Anybody knows how to get network adapter's MAC address?

Thanks.

[jerry milana (Autodesk Co]

In most cases I think you are better off using IPCONFIG /ALL. This is
because it tells you more about the MAC addresses it finds in your system.
This can be important in choosing the MAC address you use to obtain a
license against. If the MAC address is associated with a logical device
then the license will fail if the logic changes. If you have a choice,
choose a MAC address associated with a removable Ethernet adapter. This way
you can move the adapter to a new machine and reuse your license file in the
event of a system failure.

--
Jerry Milana,
Autodesk Consulting

"Bert Swerza" <s@s.com> wrote in message news:4192a91f_2@newsprd01...

In windows xp (i think it is standard) start a command prompt and type
GETMAC.

you can also get the tool from

http://www.microsoft.com/windows2000...g/getmac-o.asp

more options if you type GETMAC/?
you have the options for remote systems, etc

hope this helps

Swerza

"Stanley" <KW_Chan@FengChuan.com.hk> wrote in message
news:419163dc_3@newsprd01...
Anybody knows how to get network adapter's MAC address?

Thanks.