samreport log file generation

[chanley]

I am attempting to load samreport lite on our license server for ACAD2004 running flexLM. I have followed the instructions listed here;
http://usa.autodesk.com/adsk/servlet...linkID=2475323
I am getting stuck on the "In the SAMreport-Lite window, click Browse to locate and specify your report log (report.rl). WHAT LOG FILE??!?!!
This is a new installation and it says I can't start the reporting functions until I have a log file.
I have the options file in the same location as my flexLM license file and the path to the logfile output has no spaces in it, as per the instructions.
I have stopped/started the license server and still no generation of said .rl file. any help would be much appreciated.

[Efim Tetelman (Autodesk,]

Do you have REPORTLOG command specified in your options file?
If yes, can you please send me your options file and I take a look on it.

Regards,
Efim


"chanley" <nospam@address.withheld> wrote in message
news:29822372.1091209545015.JavaMail.jive@jiveforu m2...

I am attempting to load samreport lite on our license server for ACAD2004
running flexLM. I have followed the instructions listed here;

http://usa.autodesk.com/adsk/servlet...linkID=2475323
I am getting stuck on the "In the SAMreport-Lite window, click Browse to
locate and specify your report log (report.rl). WHAT LOG FILE??!?!!
This is a new installation and it says I can't start the reporting
functions until I have a log file.
I have the options file in the same location as my flexLM license file and
the path to the logfile output has no spaces in it, as per the instructions.
I have stopped/started the license server and still no generation of said
..rl file. any help would be much appreciated.

[chanley]

Thanks for the reply. I'm not sure where to send it but I'll attach it to this post.
This is the only line in my options file, (adskflex.opt)
REPORTLOG +c:\useagelogs\report.rl

Do I need to point to the options file in my ACAD License file, (add a daemon line or something?), or does it automatically check for an options file? While there are no spaces in the path name to the intended destination log file location, is there a character limit that may be preventing it from being generated? Thanks for any help you can offer on this matter.

[Jimmy Bergmark]

The file looks ok. Not sure if it's sensitive to an extra line break though.

--
Best Regards, Jimmy Bergmark
CAD and Database Developer Manager at www.pharmadule-emtunga.com
Take a look at
JTB FlexReport (FLEXlm report tool) - www.jtbworld.com/jtbflexreport
www.jtbworld.com


"chanley" <nospam@address.withheld> skrev i meddelandet
news:101406.1091457885536.JavaMail.jive@jiveforum2 .autodesk.com...

Thanks for the reply. I'm not sure where to send it but I'll attach it to
this post.
This is the only line in my options file, (adskflex.opt)
REPORTLOG +c:\useagelogs\report.rl

Do I need to point to the options file in my ACAD License file, (add a
daemon line or something?), or does it automatically check for an options

file? While there are no spaces in the path name to the intended
destination log file location, is there a character limit that may be
preventing it from being generated? Thanks for any help you can offer on
this matter.

[Efim Tetelman (Autodesk,]

It should look like this REPORTLOG +"c:\useagelogs\report.rl" and should be
stored in the same directory where is license file located.

my direct email is efim.tetelman@autodesk.com

Regards,
Efim

"chanley" <nospam@address.withheld> wrote in message
news:101406.1091457885536.JavaMail.jive@jiveforum2 .autodesk.com...

Thanks for the reply. I'm not sure where to send it but I'll attach it to
this post.
This is the only line in my options file, (adskflex.opt)
REPORTLOG +c:\useagelogs\report.rl

Do I need to point to the options file in my ACAD License file, (add a
daemon line or something?), or does it automatically check for an options

file? While there are no spaces in the path name to the intended
destination log file location, is there a character limit that may be
preventing it from being generated? Thanks for any help you can offer on
this matter.

[molokaiboy]

I am trying to do the same thing and get this error msg:

FLEXlm error: -53,234
For further information, refer to the FLEXlm End User Manual,
available at "www.globetrotter.com". Continuing...
Unable to generate report: Error: No report logs to process

I am running Samreport v3.2

Can you advise.

Thanks,
Collin

[Efim Tetelman (Autodesk,]

Hi Collin,

the "FLEXlm error: -53,234" which means that you didn't navigate your SAM
Report to the report log file which should be generated by FLEXlm if you
have set it in options file.

Regards,
Efim

"molokaiboy" <nospam@address.withheld> wrote in message
news:17551686.1091644755472.JavaMail.jive@jiveforu m2.autodesk.com...

I am trying to do the same thing and get this error msg:

FLEXlm error: -53,234
For further information, refer to the FLEXlm End User Manual,
available at "www.globetrotter.com". Continuing...
Unable to generate report: Error: No report logs to process

I am running Samreport v3.2

Can you advise.

Thanks,
Collin

[molokaiboy]

I have the line of code in my options file. What do I need to do to resolve this problem?

Collin

[Efim Tetelman (Autodesk,]

Collin,

can please send me your options file to see if it looks correctly?

efim.tetelman@autodesk.com

Regards,
Efim



"molokaiboy" <nospam@address.withheld> wrote in message
news:27429961.1091671870070.JavaMail.jive@jiveforu m2.autodesk.com...

I have the line of code in my options file. What do I need to do to
resolve this problem?

Collin

[molokaiboy]

file sent