Plotting wipeouts on OCE 9600 w/Reprodesk

[Matt W]

Does anyone out there have an OCE 9600 with Reprodesk 4.21?
To this very day, I can't get wipeouts to plot correctly using this and ACAD
2005.
I've got a PC3 set up (which I think was originally created from an HP 750C+
driver).
Wipeouts will print correctly when sent to the HP 8150 laserjet, but not
through Reprodesk/OCE 9600.

If anyone has any ideas as to what I can do to resolve this or if there is
any additional info I can provide, please let me know.

Thanks in advance!

--
I support two teams: The Red Sox and whoever beats the Yankees.

[Govert J. Knopper]

Reprodesk does not do wipeouts.

BTW, 4.21 is pretty old. Current release/patchlevel is 4.30.6

Govert

Matt W wrote:

Does anyone out there have an OCE 9600 with Reprodesk 4.21?
To this very day, I can't get wipeouts to plot correctly using this and ACAD
2005.
I've got a PC3 set up (which I think was originally created from an HP 750C+
driver).
Wipeouts will print correctly when sent to the HP 8150 laserjet, but not
through Reprodesk/OCE 9600.

If anyone has any ideas as to what I can do to resolve this or if there is
any additional info I can provide, please let me know.

Thanks in advance!

[Scott Sheppard]

1. The first release of Repro Desk that supported the 9600 was Repro Desk
4.2.5.
2. Even the latest 4.30.6 Repro Desk uses ObjectDBX which does not support
ObjectARX applications. Wipe Out is an ObejctARX application.
3. The latest Repro Desk, Repro Desk Server 1.6.2, integrates with AutoCAD
directly. So wipe outs are supported!

I support two teams: fellow developers and whoever is on maintenance.

"Matt W" <notMattW@BVHis.com> wrote in message
news:41a4da7e$1_3@newsprd01...

Does anyone out there have an OCE 9600 with Reprodesk 4.21?
To this very day, I can't get wipeouts to plot correctly using this and
ACAD 2005.
I've got a PC3 set up (which I think was originally created from an HP
750C+ driver).
Wipeouts will print correctly when sent to the HP 8150 laserjet, but not
through Reprodesk/OCE 9600.

If anyone has any ideas as to what I can do to resolve this or if there is
any additional info I can provide, please let me know.

Thanks in advance!

--
I support two teams: The Red Sox and whoever beats the Yankees.

[Matt W]

Thanks.

--
I support two teams: The Red Sox and whoever beats the Yankees.

"Scott Sheppard" <nospam@address.witheld> wrote in message
news:41a514fa$1_1@newsprd01...

1. The first release of Repro Desk that supported the 9600 was Repro Desk
4.2.5.
2. Even the latest 4.30.6 Repro Desk uses ObjectDBX which does not support
ObjectARX applications. Wipe Out is an ObejctARX application.
3. The latest Repro Desk, Repro Desk Server 1.6.2, integrates with AutoCAD
directly. So wipe outs are supported!

I support two teams: fellow developers and whoever is on maintenance.

"Matt W" <notMattW@BVHis.com> wrote in message
news:41a4da7e$1_3@newsprd01...
Does anyone out there have an OCE 9600 with Reprodesk 4.21?
To this very day, I can't get wipeouts to plot correctly using this and
ACAD 2005.
I've got a PC3 set up (which I think was originally created from an HP
750C+ driver).
Wipeouts will print correctly when sent to the HP 8150 laserjet, but not
through Reprodesk/OCE 9600.

If anyone has any ideas as to what I can do to resolve this or if there
is any additional info I can provide, please let me know.

Thanks in advance!

--
I support two teams: The Red Sox and whoever beats the Yankees.

[Matt W]

Thanks.

--
I support two teams: The Red Sox and whoever beats the Yankees.

"Govert J. Knopper" <govert@nodots.d.e.r.e.u.m.a.u.x.com> wrote in message
news:41a50320$1_1@newsprd01...

Reprodesk does not do wipeouts.

BTW, 4.21 is pretty old. Current release/patchlevel is 4.30.6

Govert

Matt W wrote:
Does anyone out there have an OCE 9600 with Reprodesk 4.21?
To this very day, I can't get wipeouts to plot correctly using this and
ACAD 2005.
I've got a PC3 set up (which I think was originally created from an HP
750C+ driver).
Wipeouts will print correctly when sent to the HP 8150 laserjet, but not
through Reprodesk/OCE 9600.

If anyone has any ideas as to what I can do to resolve this or if there
is any additional info I can provide, please let me know.

Thanks in advance!