Control-C and Control-V does not work in my AutoCAD 2005. Does anyone know how to fix this?
HELP!!! Control-C and Control-V does not workControl-C and Control-V does not work in my AutoCAD 2005. Does anyone know how to fix this?
What the H*&& is going on? Look at 2004 discussion group - another company is having the same
problem.
What do you mean by 'they don't work'?
When you Ctrl+C or Ctrl+V, what do you see at the command prompt? You should
see either _copyclip or _pasteclip. Do you see something else? Nothing at
all?
--
Dave Byrnes / Vancouver, BC
Autodesk Discussion Group Facilitator
"bshull" <nospam@address.withheld> wrote in message
news:14023129.1109360536965.JavaMail.jive@jiveforu m2.autodesk.com...
Control-C and Control-V does not work in my AutoCAD 2005. Does anyone
know how to fix this?
I started having trouble with my cut & paste. It happened when I was editing
my acad.lsp & acaddoc.lsp.
I don't know what I did to them to mess them up but that's where my problem
was at.
It caused erratic behavior... The first drawing I opened it worked in & the
second did not & visa versa.
Rick
"Dave Byrnes" <discussion@autodesk.com> wrote in message
news:42210013_3@newsprd01...
What do you mean by 'they don't work'?
When you Ctrl+C or Ctrl+V, what do you see at the command prompt? You
should see either _copyclip or _pasteclip. Do you see something else?
Nothing at all?
--
Dave Byrnes / Vancouver, BC
Autodesk Discussion Group Facilitator
"bshull" <nospam@address.withheld> wrote in message
news:14023129.1109360536965.JavaMail.jive@jiveforu m2.autodesk.com...
Control-C and Control-V does not work in my AutoCAD 2005. Does anyone
know how to fix this?
Options;User Preferences;Windows Standard Behavior;Windows Standard
Accelerator Keys (should be checked).
--
Bill DeShawn
bdeshawn@nospamsterling.net
http://my.sterling.net~bdeshawn
"Rick Keller" <rick@NOT.NET> wrote in message news:4223342f$1_1@newsprd01...
I started having trouble with my cut & paste. It happened when I was
editing
my acad.lsp & acaddoc.lsp.
I don't know what I did to them to mess them up but that's where my
problem
was at.
It caused erratic behavior... The first drawing I opened it worked in &
the
second did not & visa versa.
Rick
"Dave Byrnes" <discussion@autodesk.com> wrote in message
news:42210013_3@newsprd01...
What do you mean by 'they don't work'?
When you Ctrl+C or Ctrl+V, what do you see at the command prompt? You
should see either _copyclip or _pasteclip. Do you see something else?
Nothing at all?
--
Dave Byrnes / Vancouver, BC
Autodesk Discussion Group Facilitator
"bshull" <nospam@address.withheld> wrote in message
news:14023129.1109360536965.JavaMail.jive@jiveforu m2.autodesk.com...
Control-C and Control-V does not work in my AutoCAD 2005. Does anyone
know how to fix this?
Mine are not checked and still can cut and paste.
When I try to use "copy with base point", and enable "pickfirst".
I selected the entities to be copy and pick the base point, ACAD2005 ask me
to re-select the entities again, anyone have this problem too and have
solution to fix it!
Thx,
Ken
"bshull" <nospam@address.withheld> wrote in message
news:14023129.1109360536965.JavaMail.jive@jiveforu m2.autodesk.com...
Control-C and Control-V does not work in my AutoCAD 2005. Does anyone
know how to fix this?
Licensing control
Posting Permissions
Reply With Quote