| Author |
Message |
JVandenelsen@carrollhealt
Guest
|
 Posted:
Sun Jan 02, 2005 12:03 pm Post subject:
BOM, Balloon Numbering - 2005 |
|
|
BOM and balloons in a drawing
Insert BOM
Begin Ballooning
- Drawing with sub assemblies and components.
BOM properties:
- Upper level selected
When attaching baloons the baloon numbers assigned to Assembly (parts) as
though individual component, rather than sub assembly number. (if I
described it right.
EG:
An assembly with 5 sub assemblies and 10 individual components.
Each subassembly has greater than 10 components, including subs.
The BOM lists 15 items
selecting an item to balloon, from a view, and the baloon number comes up
35. I.m expecting something like 12.
I can make it work by checking and unchecking the various BOM properties
options - Upper level Assemblies", "Parts" and back again.
Question:
Is this a bug or is there a setting I can configure.
Thanks in Advance
JV
|
|
| Back to top |
|
 |
Wayne Tiffany
Guest
|
| Posted:
Mon Jan 03, 2005 8:49 pm Post subject:
Re: BOM, Balloon Numbering - 2005 |
|
|
Questions.
1. What SP?
2. SW BOM, or Excel BOM?
3. Is it just one particular assy, or any assy?
4. Have you tried a different drawing template?
WT
<JVandenelsen@carrollhealthcare.com> wrote in message
news:Xns95D21533EBBE7JVandenelsencarrollh@216.196.97.131...
| Quote: | BOM and balloons in a drawing
Insert BOM
Begin Ballooning
- Drawing with sub assemblies and components.
BOM properties:
- Upper level selected
When attaching baloons the baloon numbers assigned to Assembly (parts) as
though individual component, rather than sub assembly number. (if I
described it right.
EG:
An assembly with 5 sub assemblies and 10 individual components.
Each subassembly has greater than 10 components, including subs.
The BOM lists 15 items
selecting an item to balloon, from a view, and the baloon number comes up
35. I.m expecting something like 12.
I can make it work by checking and unchecking the various BOM properties
options - Upper level Assemblies", "Parts" and back again.
Question:
Is this a bug or is there a setting I can configure.
Thanks in Advance
JV |
|
|
| Back to top |
|
|
JVandenelsen@carrollhealt
Guest
|
| Posted:
Tue Jan 04, 2005 12:23 am Post subject:
Re: BOM, Balloon Numbering - 2005 |
|
|
"Wayne Tiffany" <wayne.tiffanyRMVJUNK@asi.com> wrote in
news:33t7lkF429paeU1@individual.net:
| Quote: | Questions.
1. What SP?
SP0 |
| Quote: | 2. SW BOM, or Excel BOM?
SW BOM |
| Quote: | 3. Is it just one particular assy, or any assy?
Any Assy |
| Quote: | 4. Have you tried a different drawing template?
Aha! |
That gives me and idea. I'll give it a try and respond back here.
Thanks.
JV
| Quote: |
WT
JVandenelsen@carrollhealthcare.com> wrote in message
news:Xns95D21533EBBE7JVandenelsencarrollh@216.196.97.131...
BOM and balloons in a drawing
Insert BOM
Begin Ballooning
- Drawing with sub assemblies and components.
BOM properties:
- Upper level selected
When attaching baloons the baloon numbers assigned to Assembly
(parts) as though individual component, rather than sub assembly
number. (if I described it right.
EG:
An assembly with 5 sub assemblies and 10 individual components.
Each subassembly has greater than 10 components, including subs.
The BOM lists 15 items
selecting an item to balloon, from a view, and the baloon number
comes up 35. I.m expecting something like 12.
I can make it work by checking and unchecking the various BOM
properties options - Upper level Assemblies", "Parts" and back again.
Question:
Is this a bug or is there a setting I can configure.
Thanks in Advance
JV
|
|
|
| Back to top |
|
|
JVandenelsen@carrollhealt
Guest
|
| Posted:
Tue Jan 04, 2005 12:32 am Post subject:
Re: BOM, Balloon Numbering - 2005 |
|
|
"JVandenelsen@carrollhealthcare.com" <JVandenelsen@carrollhealthcare.com>
wrote in news:Xns95D3929CA9039JVandenelsencarrollh@216.196.97.131:
| Quote: | "Wayne Tiffany" <wayne.tiffanyRMVJUNK@asi.com> wrote in
news:33t7lkF429paeU1@individual.net:
Questions.
1. What SP?
SP0
2. SW BOM, or Excel BOM?
SW BOM
3. Is it just one particular assy, or any assy?
Any Assy
4. Have you tried a different drawing template?
Aha!
That gives me and idea. I'll give it a try and respond back here.
|
Well, that wasn't it.
The problem persists using any template.
(BOM groups correctly while the balloon numbers group for a momemt and
revert back to ungrouped numbering.)
| Quote: |
Thanks.
JV
WT
JVandenelsen@carrollhealthcare.com> wrote in message
news:Xns95D21533EBBE7JVandenelsencarrollh@216.196.97.131...
BOM and balloons in a drawing
Insert BOM
Begin Ballooning
- Drawing with sub assemblies and components.
BOM properties:
- Upper level selected
When attaching baloons the baloon numbers assigned to Assembly
(parts) as though individual component, rather than sub assembly
number. (if I described it right.
EG:
An assembly with 5 sub assemblies and 10 individual components.
Each subassembly has greater than 10 components, including subs.
The BOM lists 15 items
selecting an item to balloon, from a view, and the baloon number
comes up 35. I.m expecting something like 12.
I can make it work by checking and unchecking the various BOM
properties options - Upper level Assemblies", "Parts" and back again.
Question:
Is this a bug or is there a setting I can configure.
Thanks in Advance
JV
|
|
|
| Back to top |
|
|
Wayne Tiffany
Guest
|
| Posted:
Tue Jan 04, 2005 12:49 am Post subject:
Re: BOM, Balloon Numbering - 2005 |
|
|
Are you ballooning the same view as has the BOM attached? I don't use the
SW BOM so I'm speaking from a bit of ignorance, but with the Excel BOM, if
you are ballooning a view that is tied to a different configuration than the
view tied to the BOM, you often get strange results.
WT
<JVandenelsen@carrollhealthcare.com> wrote in message
news:Xns95D39414FD076JVandenelsencarrollh@216.196.97.131...
| Quote: | "JVandenelsen@carrollhealthcare.com" <JVandenelsen@carrollhealthcare.com
wrote in news:Xns95D3929CA9039JVandenelsencarrollh@216.196.97.131:
"Wayne Tiffany" <wayne.tiffanyRMVJUNK@asi.com> wrote in
news:33t7lkF429paeU1@individual.net:
Questions.
1. What SP?
SP0
2. SW BOM, or Excel BOM?
SW BOM
3. Is it just one particular assy, or any assy?
Any Assy
4. Have you tried a different drawing template?
Aha!
That gives me and idea. I'll give it a try and respond back here.
Well, that wasn't it.
The problem persists using any template.
(BOM groups correctly while the balloon numbers group for a momemt and
revert back to ungrouped numbering.)
Thanks.
JV
WT
JVandenelsen@carrollhealthcare.com> wrote in message
news:Xns95D21533EBBE7JVandenelsencarrollh@216.196.97.131...
BOM and balloons in a drawing
Insert BOM
Begin Ballooning
- Drawing with sub assemblies and components.
BOM properties:
- Upper level selected
When attaching baloons the baloon numbers assigned to Assembly
(parts) as though individual component, rather than sub assembly
number. (if I described it right.
EG:
An assembly with 5 sub assemblies and 10 individual components.
Each subassembly has greater than 10 components, including subs.
The BOM lists 15 items
selecting an item to balloon, from a view, and the baloon number
comes up 35. I.m expecting something like 12.
I can make it work by checking and unchecking the various BOM
properties options - Upper level Assemblies", "Parts" and back again.
Question:
Is this a bug or is there a setting I can configure.
Thanks in Advance
JV
|
|
|
| Back to top |
|
|
Locutus
Guest
|
| Posted:
Tue Jan 04, 2005 1:06 am Post subject:
Re: BOM, Balloon Numbering - 2005 |
|
|
"Wayne Tiffany" <wayne.tiffanyRMVJUNK@asi.com> wrote in
news:33tln6F4498u3U1@individual.net:
| Quote: | Are you ballooning the same view as has the BOM attached? I don't use
the SW BOM so I'm speaking from a bit of ignorance, but with the Excel
BOM, if you are ballooning a view that is tied to a different
configuration than the view tied to the BOM, you often get strange
results.
WT
|
Yes, Balooning from the same view.
However, that gave me a thought. So I checked the congfiguration on that
view. Sure enough, not the same as what I had checked in the BOM
propderties.
That's done it.
I'm good now.
Thanks for the help.
JV
| Quote: |
JVandenelsen@carrollhealthcare.com> wrote in message
news:Xns95D39414FD076JVandenelsencarrollh@216.196.97.131...
"JVandenelsen@carrollhealthcare.com"
JVandenelsen@carrollhealthcare.com> wrote in
news:Xns95D3929CA9039JVandenelsencarrollh@216.196.97.131:
"Wayne Tiffany" <wayne.tiffanyRMVJUNK@asi.com> wrote in
news:33t7lkF429paeU1@individual.net:
Questions.
1. What SP?
SP0
2. SW BOM, or Excel BOM?
SW BOM
3. Is it just one particular assy, or any assy?
Any Assy
4. Have you tried a different drawing template?
Aha!
That gives me and idea. I'll give it a try and respond back here.
Well, that wasn't it.
The problem persists using any template.
(BOM groups correctly while the balloon numbers group for a momemt
and revert back to ungrouped numbering.)
Thanks.
JV
WT
JVandenelsen@carrollhealthcare.com> wrote in message
news:Xns95D21533EBBE7JVandenelsencarrollh@216.196.97.131...
BOM and balloons in a drawing
Insert BOM
Begin Ballooning
- Drawing with sub assemblies and components.
BOM properties:
- Upper level selected
When attaching baloons the baloon numbers assigned to Assembly
(parts) as though individual component, rather than sub assembly
number. (if I described it right.
EG:
An assembly with 5 sub assemblies and 10 individual components.
Each subassembly has greater than 10 components, including subs.
The BOM lists 15 items
selecting an item to balloon, from a view, and the baloon number
comes up 35. I.m expecting something like 12.
I can make it work by checking and unchecking the various BOM
properties options - Upper level Assemblies", "Parts" and back
again.
Question:
Is this a bug or is there a setting I can configure.
Thanks in Advance
JV
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in