| Author |
Message |
scrupul0us
Guest
|
 Posted:
Wed Mar 30, 2005 10:10 pm Post subject:
How much RAM in my plotter? |
|
|
I have a HPDesginJet 430c... and I'd like to know how much memory is in it so I can upgrade if possible.
How can I tell how much memory I have in it?
I just popped open the back and there are two simms installed... the furthest back is labeled:
C3190-20104 and is about a 1 inch tall simm
(this number is NOT in my plotter manual as an upgrade part)
the closest has no serial number just numbers on the chips, of which have no meaningful serials or markings
(leads me to beleive this is the original chip)
anyone?
|
|
| Back to top |
|
 |
Tripp Corbin
Guest
|
| Posted:
Wed Mar 30, 2005 10:29 pm Post subject:
Re: How much RAM in my plotter? |
|
|
I am not familiar with that specific model but with the 650, 750, 800, 1050,
& 2500 models you could press two buttons on the front panel at the same
time to print a configuration. The buttons were labeled on the front panel.
Of course if this plotter came with all the default equipment from the
factory with no upgrades you could check the spec sheet on HP's website for
that model plotter.
--
Tripp Corbin, GISP, MCP
Associate Vice President, GIS/Mapping
ESRI Authorized Instructor
Keck & Wood, Inc.
(678) 417-4000
www.keckwood.com
(678) 417-4000
(678) 417-8785 Fax
"scrupul0us" <nospam@address.withheld> wrote in message
news:12885325.1112202676748.JavaMail.jive@jiveforum2.autodesk.com...
| Quote: | I have a HPDesginJet 430c... and I'd like to know how much memory is in it
so I can upgrade if possible.
How can I tell how much memory I have in it?
I just popped open the back and there are two simms installed... the
furthest back is labeled:
C3190-20104 and is about a 1 inch tall simm
(this number is NOT in my plotter manual as an upgrade part)
the closest has no serial number just numbers on the chips, of which have
no meaningful serials or markings
(leads me to beleive this is the original chip)
anyone? |
|
|
| Back to top |
|
|
Joel
Guest
|
| Posted:
Wed Mar 30, 2005 11:06 pm Post subject:
Re: How much RAM in my plotter? |
|
|
What Tripp says.
But looking up HP's website, there is no 430c, only a 430 that does black
only and a 450c that is black and color.
Which one do you have?
Either way, they both come standard with 4MB of ram, but could have as much
as 36MB.
|
|
| Back to top |
|
|
scrupul0us
Guest
|
| Posted:
Thu Mar 31, 2005 12:33 am Post subject:
Re: How much RAM in my plotter? |
|
|
| the front of the unit says 430, but its been upgraded with the color package to the 450c |
|
| Back to top |
|
|
Joel
Guest
|
| Posted:
Thu Mar 31, 2005 1:24 am Post subject:
Re: How much RAM in my plotter? |
|
|
Ahh. I see.
HP's site does have a pdf of the manual (look under "Support" and plug in
"designjet 430") for the 430/450c/455 that tells you how to print out a
setup page (I think it was something like hit the "Load Paper" button, then
"Setup" button, but I can't remember now). That will print out a page that
includes the info on how much ram is installed. |
|
| Back to top |
|
|
scrupul0us
Guest
|
| Posted:
Fri Apr 01, 2005 12:01 am Post subject:
Re: How much RAM in my plotter? |
|
|
| after printing the setup sheet it appears as if i have 36 ram (4 + 32) alerady in there... thanks for the help |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in