CADForums.net

Casey Roberts · Guest

How does one go about feeding the proper information to the extrim command
via lisp? (ie entity, and side to trim)...

Here's what I have so far: (sorry bout the CAPITALS)

(DEFUN C:INTRIM ()

(SETQ SS (SSGET '((0 . "INSERT")))

COUNT 0))

(REPEAT (SSLENGTH SS)

(SETQ E1 (SSNAME SS COUNT)

IPT (CDR (ASSOC 10 (ENTGET E1))))

(C:EXTRIM) <---------------Here is where I need to feed the entity E1
and the point IPT to the extrim command.

(SETQ COUNT (+ 1 COUNT))

)

)

HO HO HO...

Casey

Walt Engle · Guest

I'm not sure why you would want to do this, when you can incorporate extrim into
the mnu or mns menus and call it up instantly. But.....to each his own choice.

cr · Guest

To automate selecting 100 blocks at once and then having it trim all
entities within the blocks.

"Walt Engle" <wengle@houston.rr.com> wrote in message
news:41C8A97F.D85EAFE3@houston.rr.com...

Walt Engle · Guest

Here's one that was posted by someone else - trims multiple circles but I wonder
if it will work on any polygon:

;;; Copyright © 2004 by Rogério Zanini®
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;Extended-TRIM - cookie-cutter routine
;
;Select a polyline, line, circle or arc and a side to trim on
;
(defun C:EXTRIM1 ( / na e1 p1 redraw_it lst n );;mudei aqui
(command "undo" "begin")
(acet-error-init (list
(list "cmdecho" 0
"highlight" 0
"regenmode" 1
"osmode" 0
"ucsicon" 0
"offsetdist" 0
"attreq" 0
"plinewid" 0
"plinetype" 1
"gridmode" 0
"celtype" "CONTINUOUS"
"ucsfollow" 0
"limcheck" 0
)
T ;flag. True means use undo for error clean up.
'(if redraw_it (redraw na 4))
);list
);acet-error-init
;(setq na (acet-ui-single-select '((-4 . "<OR")(0 . "CIRCLE")(-4 . "OR>"))T
; );acet-ui-single-select
;);setq
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(setq na (entlast));;mudei aqui
(setq e1 (entget (entlast)));;mudei aqui
(setq p1 (cdr (assoc 10 e1)));;mudei aqui
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(if na
(progn
(setq e1 (entget na));;setq
(if (or (equal "TEXT" (cdr (assoc 0 e1)))
(equal "MTEXT" (cdr (assoc 0 e1)))
(equal "ATTDEF" (cdr (assoc 0 e1)))
(equal "IMAGE" (cdr (assoc 0 e1)))
);or
(progn
(setq lst (acet-geom-object-point-list na nil))
(setq n 0)
(command "_.pline")
(repeat (length lst)
(command (nth n lst))
(setq n (+ n 1));setq
);repeat
(if (not (equal (car lst) (last lst) 0.0000001))
(command "_cl")
(command "")
);if
(setq na (entlast)
e1 na
);setq
);progn then draw a temp pline to be the cutting edge.
(setq e1 nil)
);if
(redraw na 3)
(setq redraw_it T)

;(setq p1 (getpoint "\nSpecify the side to trim on:"));setq
(redraw na 4)
(setq redraw_it nil)
(if p1 (etrim na p1));if
(if e1
(progn
(if (setq p1 (acet-layer-locked (getvar "clayer")))
(command "_.layer" "_un" (getvar "clayer") "")
);if
(entdel e1)
(if p1
(command "_.layer" "_lock" (getvar "clayer") "")
);if
);progn
);if
);progn
);if
(acet-error-restore)
(command "undo" "end");;mudei aqui
(princ)
);defun c:extrim

;!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
;Entity-TRIM function
;takes: na - entity name
; a - a point, the side to trim on
;NOTE: This function does not allow for the possible miss of
; non-continuous linetypes.
;
(defun etrim ( na a / la b d e1 lst lst2 n j k m ss na2 na3 na4
x y z flag flag2 flag3 zlst
)

(command "undo" "begin")
(setq e1 (entget na));setq
(if (or (setq flag (equal (acet-dxf 0 e1) "POLYLINE"))
(setq flag (equal (acet-dxf 0 e1) "LWPOLYLINE"))
(equal (acet-dxf 0 e1) "LINE")
(equal (acet-dxf 0 e1) "CIRCLE")
(equal (acet-dxf 0 e1) "ARC")
(equal (acet-dxf 0 e1) "ELLIPSE")
(equal (acet-dxf 0 e1) "TEXT")
(equal (acet-dxf 0 e1) "ATTDEF")
(equal (acet-dxf 0 e1) "MTEXT")
);or
(progn
(if (and flag
(equal 8 (logand 8 (acet-dxf 70 e1)))
);and
(setq flag nil)
);if
(setq a (trans a 1 0));setq
(command "_.ucs" "_View")

(setq lst (acet-geom-object-point-list na nil) ;;;find extents of selected
cutting edge object
lst (acet-geom-list-extents lst)
x (- (car (cadr lst)) (car (car lst)))
y (- (cadr (cadr lst)) (cadr (car lst)))
x (* 0.075 x)
y (* 0.075 y)
z (list x y)
x (list (+ (car (cadr lst)) (car z))
(+ (cadr (cadr lst)) (cadr z))
);list
y (list (- (car (car lst)) (car z))
(- (cadr (car lst)) (cadr z))
);list
zlst (zoom_2_object (list x y))
);setq
;(command "_.zoom" "_w" x y)
(command "_.zoom" "_w" (car zlst) (cadr zlst))

(entupd na) ;;;update the ent. so it's curves display
smoothly

(setq lst (acet-geom-object-point-list na
(/ (acet-geom-pixel-unit) 2.0)
)
);setq
(if (or (not flag)
(not (acet-geom-self-intersect lst nil))
);or
(progn ;then the object is valid and not a self
intersecting polyline.
(if (and flag
(equal (car lst) (last lst) 0.0001)
);and
(setq flag3 T);then the polyline could potentialy need a second
offset
);if
(if (setq la (acet-layer-locked (getvar "clayer")))
(command "_.layer" "_unl" (getvar "clayer") "")
);if

(command "_.pline")
(setq b nil)
(setq n 0);setq
(repeat (length lst)
(setq d (nth n lst))
(if (not (equal d b 0.0001))
(progn
(command d)
(setq lst2 (append lst2 (list d)));setq
(setq b d);setq
);progn
);if
(setq n (+ n 1))
);repeat
(command "")
(setq na2 (entlast)
ss (ssadd)
ss (ssadd na2 ss)
lst nil
);setq
(acet-ss-visible ss 1)
(setq lst2 (get_fence_points na2 a lst2 flag3 flag));setq

(if la
(command "_.layer" "_lock" (getvar "clayer") "")
);if
(command "_.ucs" "_p")
;Move the ents to force a display update of the ents to avoid viewres
problems.
(setvar "highlight" 0)
(if (setq ss (ssget "_f" (last lst2)))
(command "_.move" ss "" "0,0,0" "0,0,0")
);if
(if flag
(progn
(if (setq la (acet-layer-locked (acet-dxf 8 e1)))
(command "_.layer" "_unl" (acet-dxf 8 e1) "")
);if
(acet-ucs-set-z (acet-dxf 210 e1))
(command "_.copy" na "" "0,0,0" "0,0,0")
;(entdel na)
(acet-ss-visible (ssadd na (ssadd)) 1);make it invisible for a
while.
;rk 12:01 PM 3/10/98
(setq na3 na
na (entlast)
);setq
(command "_.pedit" na "_w" "0.0" "_x")
(command "_.ucs" "_p")
(if la (command "_.layer" "_lock" (acet-dxf 8 e1) ""));if
);progn
);if
(command "_.trim" na "")
(setq m (- (length lst2) 1));setq
(setq k 0)
(repeat (length lst2)
(setq lst (nth k lst2))
(setq a (trans (car lst) 0 1))
(setq n 1)
(repeat (- (length lst) 1) ;repeat each fence list
(setq b (trans (nth n lst) 0 1))
(if (equal a b 0.0001)
(setq flag2 T)
(setq flag2 nil)
);if
(setq na4 nil);setq
(setq j 0);setq
(while (not flag2) ;repeat each segment of the fence until no
new ents are created.
(setq na4 (entlast));setq
(command "_F" a b "")
(if (and (equal na4 (entlast))
(or (not (equal k m))
(> j 0)
);or
);and
(setq flag2 T)
);if
(setq j (+ j 1));setq
);while
(setq a b);setq
(setq n (+ n 1));setq
);repeat

(setq k (+ k 1))
);repeat
(command "")

(if flag
(progn
(if (setq la (acet-layer-locked (acet-dxf 8 e1)))
(command "_.layer" "_unl" (acet-dxf 8 e1) "")
);if
(entdel na) ;get rid of the copy

;(entdel na3);bring back the original
(acet-ss-visible (ssadd na3 (ssadd)) 0) ;bring back the original
;rk 12:01 PM 3/10/98
(if la (command "_.layer" "_lock" (acet-dxf 8 e1) ""));if
);progn
);if
);progn
(progn
(command "_.ucs" "_p")
(princ "\nSelf intersecting edges are not acceptable.")
);progn else invalid self intersecting polyline
);if
(command "_.zoom" "_p")
);progn then it's a most likely a valid entity.
);if
);defun etrim

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(defun another_offset ( pl1 pl2 a1 a2 b na2 lst2 a lst3 lst4 / na ss lst da1
da2)

(setq da1 (abs (- a2 a1)));setq
(setq da2 (- (* b (max pl2 pl1))
(/ (* b (abs (- pl2 pl1)))
2.0
)
)
);setq
(if (> (abs (- da2 da1))
(* 0.01 (max a1 a2))
)
(progn

(acet-pline-make (list lst2))
(setq na (entlast)
na2 (entlast)
ss (ssadd)
ss (ssadd na ss)
);setq
(acet-ss-visible ss 1)
(command "_.offset" b na2 a "")
(if (and (not (equal na (entlast)))
(setq lst3 (acet-geom-vertex-list (entlast)))
(setq lst3 (intersect_check lst2 lst3 lst4))
);and
(progn
(acet-ss-visible (ssadd (entlast) (ssadd)) 1)
(command "_.area" "_ob" (entlast))
(setq pl2 (getvar "perimeter")
a2 (getvar "area")
);setq
(setq lst (list (acet-geom-vertex-list (list (entlast) 0))));setq
(entdel (entlast));then offset was a success so delete the ent after
getting it's info
);progn then
(if (not (equal na (entlast))) (entdel (entlast)));if else
);if
(entdel na2)
);progn then let's do that second offset
);if

lst
);defun another_offset

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(defun get_fence_points ( na2 a lst2 flag plflag / a1 a2 pl1 pl2 b c d n
lst lst2 lst3 lst4 na
)

(if flag
(progn
(setq lst2 (cdr lst2));setq
(repeat (fix (/ (length lst2) 2))
(setq lst2 (append (cdr lst2) (list (car lst2)));append
);setq
);repeat
(setq lst2 (append lst2 (list (car lst2))));setq
(command "_.area" "_ob" na2)
(setq pl1 (getvar "perimeter")
a1 (getvar "area")
);setq
);progn
);if

(setq a (trans a 0 1)
b (* (getvar "viewsize") 0.05);initial offset distance
n 3.0 ;number of offsets
d (/ b (- n 1)) ;delta offset
c (acet-geom-pixel-unit)
lst4 (acet-geom-view-points)
);setq

(while (> b c)
(setq na (entlast))
(command "_.offset" b na2 a "")
(if (and (not (equal na (entlast)))
(setq lst3 (acet-geom-vertex-list (entlast)))
(or (not plflag)
(setq lst3 (intersect_check lst2 lst3 lst4))
);or
);and
(progn
(setq lst3 (acet-geom-m-trans lst3 1 0))
(acet-ss-visible (ssadd (entlast) (ssadd)) 1)
(if flag
(progn
(command "_.area" "_ob" (entlast))
(setq pl2 (getvar "perimeter")
a2 (getvar "area")
);setq
);progn
);if
(setq lst (append lst (list lst3)));setq
(entdel (entlast)) ;delete the ent after getting it's vertex info
(if flag
(setq lst (append lst
(another_offset pl1 pl2 a1 a2 b na2 lst2 a lst3 lst4)

);append
);setq
);if
);progn then offset was a success
(if (not (equal na (entlast))) (entdel (entlast)));if else
);if
(setq b (- b d));setq
);while
(setq na (entlast))
(command "_.offset" c na2 a "")
(if (and (not (equal na (entlast)))
(setq lst3 (acet-geom-vertex-list (entlast)))
(or (not plflag)
(setq lst3 (intersect_check lst2 lst3 lst4))
);or
);and
(progn
(setq lst3 (acet-geom-m-trans lst3 1 0))
(acet-ss-visible (ssadd (entlast) (ssadd)) 1)
(if flag
(progn
(command "_.area" "_ob" (entlast))
(setq pl2 (getvar "perimeter")
a2 (getvar "area")
);setq
);progn
);if
(setq lst (append lst (list lst3)));setq
(entdel (entlast));then offset was a success so delete the ent after
getting it's info
(if flag
(setq lst (append lst
(another_offset pl1 pl2 a1 a2 c na2 lst2 a lst3 lst4)

);append
);setq
);if
);progn then
(if (not (equal na (entlast))) (entdel (entlast)));if else
);if
(entdel na2)

lst
);defun get_fence_points

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;returns a list of points on screen if the first two lists do not
;contain segments that intersect each other.
;
(defun intersect_check ( lst lst2 lst3 / x x2 y y2 lst4 flag len len2
a aa b bb c d n j)

(setq len (length lst)
len2 (length lst2)
x (car (car lst3))
x2 (car (cadr lst3))
y (cadr (car lst3))
y2 (cadr (cadr lst3))
);setq

(setq n 0);setq
(while (and (not flag)
(< (+ n 1) len2)
);and
(setq aa (nth n lst2)
bb (nth (+ n 1) lst2)
a (bns_truncate_2_view aa bb x y x2 y2)
b (bns_truncate_2_view bb aa x y x2 y2)
lst4 (append lst4 (list a))
);setq
(if (or (not (equal a aa))
(not (equal b bb))
);or
(setq lst4 (append lst4 (list b)))
);if
(setq j 0);setq
(while (and (not flag)
(< (+ j 1) len)
);and
(setq c (nth j lst)
d (nth (+ j 1) lst)
flag (inters a b c d)
);setq

(setq j (+ j 1));setq
);while

(setq n (+ n 1));setq
);while
(if (not (equal b (last lst4)))
(setq lst4 (append lst4 (list b)));setq
);if
(if (not flag)
(setq flag lst4)
(setq flag nil)
);if
flag
);defun intersect_check

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(defun zoom_2_object ( lst / p1 p2 p3 p4 p5 p6 mp dx dy dx2 dy2
r1 r2 na e1 x w h dv1 dv2 x
)

(setq lst (acet-geom-m-trans lst 1 2)
p1 (acet-geom-m-trans (acet-geom-view-points) 1 2) ;p1 and p2 are
the viewpnts
p2 (cadr p1)
p1 (car p1)
p1 (list (car p1) (cadr p1))
p2 (list (car p2) (cadr p2))
);setq
(if lst
(progn
(setq p5 (acet-geom-list-extents lst) ;p5 and p6 are the
geometry points
p6 (cadr p5)
p5 (car p5)
p5 (list (car p5) (cadr p5))
p6 (list (car p6) (cadr p6))
mp (acet-geom-midpoint p5 p6) ;prepare to resize the
geometry rectang to
dx (- (car p2) (car p1)) ;have the same dy/dx ratio as p1 p2.
dy (- (cadr p2) (cadr p1))
dx2 (- (car p6) (car p5))
dy2 (- (cadr p6) (cadr p5))
);setq
(if (equal dx 0.0) (setq dx 0.000001)) ;just in case div by zero
(if (equal dx2 0.0) (setq dx2 0.000001))
(setq r1 (/ dy dx)
r2 (/ dy2 dx2)
);setq
(if (< r2 r1)
(setq dy2 (* r1 dx2));then scale dy2 up
(progn
(if (equal r1 0.0) (setq r1 0.000001)) ;just in case div by zero
(setq dx2 (* dy2 (/ 1.0 r1)));else scale dx2 up
);progn
);if
(setq p5 (list (- (car mp) (/ dx2 1.98)) ;1.98 is used instead of 2.0 to
expand
(- (cadr mp) (/ dy2 1.98)) ;the rectangle slightly
);list
p6 (list (+ (car mp) (/ dx2 1.98))
(+ (cadr mp) (/ dy2 1.98))
);list
);setq
);progn then lst
);if
(if (and lst
(equal 0 (getvar "tilemode"))
(not (equal 1 (getvar "cvport")))
);and
(progn
(setq na (ssget "_x"
(list '(0 . "VIEWPORT") '(67 . 1) (cons 69 (getvar
"cvport")))
);ssget
na (ssname na 0)
e1 (entget na)
x (cdr (assoc 10 e1))
w (cdr (assoc 40 e1))
h (cdr (assoc 41 e1))
p3 (list (- (car x) (/ w 2.0))
(- (cadr x) (/ h 2.0))
);list
p4 (list (+ (car x) (/ w 2.0))
(+ (cadr x) (/ h 2.0))
);list
p3 (trans p3 3 2) ;p3 and p4 are the viewport points
p4 (trans p4 3 2)
dv1 (acet-geom-delta-vector p1 p3)
dv2 (acet-geom-delta-vector p2 p4)
x (distance p1 p2)
);setq
(if (equal 0 x) (setq x 0.000001));just in case
(setq x (/ (distance p5 p6)
x
)
dv1 (acet-geom-vector-scale dv1 x)
dv2 (acet-geom-vector-scale dv2 x)
p5 (acet-geom-vector-add p5 dv1)
p6 (acet-geom-vector-add p6 dv2)
);setq
);progn then
);if
(setq p1 (list (car p1) (cadr p1) 0.0)
p2 (list (car p2) (cadr p2) 0.0)
p5 (list (car p5) (cadr p5) 0.0)
p6 (list (car p6) (cadr p6) 0.0)
);setq
(if lst
(setq lst (list (trans p5 2 1)
(trans p6 2 1)
);list
);setq
(setq lst nil)
);if

lst
);defun zoom_2_object

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(princ)
;;;;;;;;;;;;;;;;;;;;;;;MEX1 - INÍCIO
(defun C:MEX1 (/ ET OLDOSMODE SG1 CTA ET1 DADOS TIPO LAY RAD CEN DIA TRIMERS )
(command "undo" "begin")
(defun DTR (a)(* PI (/ a 180.0)));defun
(command "cmdecho" 1)
(princ "\n Faz donut(s) a partir de círculo(s) ...")
(prompt "\n Select circle(s):")
(setq et (ssget '((0 . "circle"))));ok
(setq oldosmode (getvar "osmode"))
(setvar "osmode" 0)
(setq sg1 (sslength et))
(setq cta 0);ok
;-----------------------------------------------
(repeat sg1
(setq et1 (ssname et cta));ok
(setq dados (entget et1));lista ok
(setq tipo (strcase (cdr (assoc 0 dados))));atenção à maiúscula (strcase)
(setq lay (strcase (cdr (assoc 8 dados))))
(setq rad (cdr (assoc 40 dados)))
(setq cen (cdr (assoc 10 dados)))
(setq dia (* 2 rad))
;==========================
(command "layer" "set" lay "")
(setq TRIMERS (ssadd))
(if (= tipo "CIRCLE");atenção à maiúscula (strcase)
(progn
(command "copy" et1 "" "@" "@")
(setq TRIMERS (ssadd (entlast) TRIMERS))
(c:extrim1);;mudei aqui
)
)
(setq cta (+ cta 1))
(command "erase" "si" TRIMERS)
);end repeat
;-----------------------------------------------
(setvar "osmode" oldosmode)
(command "undo" "end")
(princ "\n Mextrim1.lsp ok!")
(princ)
)
;;;;;;;;;;;;;;;;;;;;;;;MEX1 - FIM

Walt Engle · Guest

My post works only for circles. Think I will take a look at it and see if I can make
it work with any polygon too.

	CADForums.net Forum Index -> Customization	All times are GMT
Page 1 of 1