CADForums.net

Christine · Guest

We've been having a couple seemingly related frequent, but intermittent
problems for a long time. The first one is when we bring a read only
part (stored on our network) into an assembly hit save and it crashes.
The second one is happens when you have an assembly open with read only
parts or sub assemblies in it and you go to measure or mate one of
these read only parts (sometimes all you need to do is put your cursor
on top of it, or when you're inserting a new read-only part) and we get
these repeated warnings saying

"Document <network drive>\Partnumber.sldprt is opened for read-only
access and is not available for write access. You must obtain write
access to this document to complete the operation" <OK button>

I understand the document is read-only, but the operation is not
something you should be prevented from doing. Most of the time, this
message comes up repeatedly (for the same part). You end up having to
play whack-a-mole with the ok button...if you can click it fast enough
you can get out of the loop and exit the command or whatever is making
the message come up.

This has happened in several different assemblies and with lots of
different read-only files. It's independent of SP and version of
SolidWorks. I've repeated the problem in several sp's of 2005, 2004
and 2006. At least 4 people have reported these problems, 2 of which
have it happening on a regular basis. We're running XP.

It seems to be log-in specific. We've had one user try another
person's machine (that wasn't having the problem) and it happened
there. We've re-loaded SW, Reloaded their window's profile, switched
machine completely, they moved their cube (different network
connection) and still the problem occurs. It does stop happening if
the individual logs in as and administrator and has full write access
to all files. But, we can't have that. We don't have a PDM system so
we control permissions by storing files in different folders (a working
directory and a controlled directory).

Our VAR believes this to be a network/rights and privileges problem.
Our IT department isn't sure what to do. If this is truly a Network
or XP problem, than I'm having problems finding someone with enough
knowledge of both XP and SolidWorks to figure this out. I appreciate
any help or ideas. TIA

-Christine

Eddie · Guest

Two other things to consider:
Under System Options - External References, make sure you check the box
next to:
"Don't prompt to save read-only referenced documents (discard
changes)."
Lastly, it is never good to work over a network.
FWIW
Eddie

Brian · Guest

I've had a similar problem, although I did not crash, but did play the
whack-a-mole game. I had a read only directory which I was using parts out
of. That was the problem, SW wants to write a ~.tmp file for every opened
assy or part, and wants to place it in the same directory as the part is
opened from. The error message was misleading, the fix was pretty simple.
Change the directory to read/write for everyone, then "select all" the files
within the directory and make only the files present "read only". SW can
then write its temp files and is happy. Hope the fix is as simple for you.

--
Brian Hokanson
Starting Line Products

"Christine" <spam_account000@yahoo.com> wrote in message
news:1132684559.351202.35390@g14g2000cwa.googlegroups.com...

Christine · Guest

Thanks Brian I'll give that a try to see if that fixes it. However, if
that's really the problem than we're going to need PDM ASAP.

Eddie,
Yes we do have that box checked and I know network = bad :) Not
much I can do w/ 20 users and no PDM. Thanks for your advice though.

-Christine

Christine · Guest

Well we finally solved the wack-a-mole problem. It was a system
option....external ref/ automatically generate names for referenced
geometry was checked on (it's off by default). SolidWorks was trying
to rename the faces of the read-only parts when it created a mate and
error out. Apparently this setting makes your system very sensitive to
read-only parts because it happened when measuring them as well.

Strange, but I'm glad that ones over....Thanks VAR!

-Christine

	CADForums.net Forum Index -> SolidWorks	All times are GMT
Page 1 of 1