| Author |
Message |
Martin Jørgensen
Guest
|
 Posted:
Wed Oct 19, 2005 8:10 pm Post subject:
export to vda file. |
|
|
Hi,
I need to export a stl/proe file into .vda file format. At my university
we have access to proe wildfire.
However, when I choose `save as` in the `file` menu, I only get a 2 kb
file which seems to only be the header... Can you reproduce this error,
because I get error mistakes after importing the file and ofcourse an
stl file of about 100 kb cant be exported to a 2 kb file and still have
the same data in it...
Who can help?
Med venlig hilsen / Best regards
Martin Jørgensen
--
---------------------------------------------------------------------------
Home of Martin Jørgensen - http://www.martinjoergensen.dk
|
|
| Back to top |
|
 |
David Janes
Guest
|
| Posted:
Thu Oct 20, 2005 7:21 am Post subject:
Re: export to vda file. |
|
|
| Quote: | "Martin Jørgensen" <unoder.spam@spam.jay.net> wrote in message
news:435696e4$0$9189$edfadb0f@dread15.news.tele.dk...
Hi,
I need to export a stl/proe file into .vda file format. At my university we have
access to proe wildfire.
However, when I choose `save as` in the `file` menu, I only get a 2 kb file
which seems to only be the header... Can you reproduce this error, because I get
error mistakes after importing the file and ofcourse an stl file of about 100 kb
cant be exported to a 2 kb file and still have the same data in it...
|
It's hard to tell, from what you ask, what you are doing or trying to do. VDA?
STL? What are you trying to save? Both are available in the 'Save as...' list. I
can save a part as easily in the one as the other. Maybe you're not trying to save
a solid (STL for sure won't facet a surface file). Don't know about VDA, but I can
export and import a solid part to VDA just fine. Need more details (couldn't be
less, you said almost nothing about your problem, like you're getting better marks
for saying less). Don't worry about rattling on, this NG is not burdened with a
lot of overly chatty people. If anything, people seem to think they can drop half
a dozen words on us and we'll guess the rest. Sorry to say, we're neither mind
readers nor dentists: we may occasionally give the impression of reading minds by
making intuitive/educated guesses, but no one here enjoys pulling teeth (or
dragging basic information out of people as if we were).
If your questions are worth answering, they are worth putting some effort into
explaining your problem, clearly and completely. And, if you don't see the value
in making that effort, why would you be surprised when no one sees the value in
making the effort to reply.
--
David Janes |
|
| Back to top |
|
|
Guest
|
| Posted:
Thu Oct 20, 2005 4:10 pm Post subject:
Re: export to vda file. |
|
|
I think what he is trying to do is to export an STL file (MESH) in VDA
format (NURBS/SOLIDS).
Thats the problem I think. The mesh is not being exported. Just to
try... you can model something, anything, and try to export the STL
mesh and the model. If I am right just the model will export.
It has to be something with the file formats and incompatibility. |
|
| Back to top |
|
|
Martin Jørgensen
Guest
|
| Posted:
Thu Oct 20, 2005 8:10 pm Post subject:
Re: export to vda file. |
|
|
David Janes wrote:
| Quote: | "Martin Jørgensen" <unoder.spam@spam.jay.net> wrote in message
news:435696e4$0$9189$edfadb0f@dread15.news.tele.dk...
-snip-
a solid (STL for sure won't facet a surface file). Don't know about VDA, but I can
export and import a solid part to VDA just fine. Need more details (couldn't be
less, you said almost nothing about your problem, like you're getting better marks
for saying less). Don't worry about rattling on, this NG is not burdened with a
-snip- |
Hi, thanks for the answer.
Ok, in contrast to you, I'm not planning to write a big novel about how
I import an stl file and then move my mouse cursor to the file menu,
where I choose to export the file "save a copy" as a .VDA file. This is
already mentioned in the subject line of this thread, so I don't
understand if this should be difficult to understand.
It seems like youre not able to reproduce this error, and you dont write
it but I assume your vda file is bigger than only containing the header
information, +2 kb. Therefore, let me hear if you can convert this stl
file and if you can convert it to .vda then I would really like to know how.
http://www.martinjoergensen.dk/temporary/backup_r25_1.stl
After I opening the file, I choose "save a copy", choose VDA file
format, and I see some possibilies, checkboxes to be marked or unmarked:
1) Export as wirefram edge
2) Surfaces
3) Datum curves and points
4) Customize layers...
5) Quilts all... All...
6) Coordinate system, default.
If I choose "options" then ProTable opens op empty.
If I choose "ok" I only get a 2 kb .vda file. Was that enough
information for you or do you want me to write a novel about this topic :-)
Med venlig hilsen / Best regards
Martin Jørgensen
--
---------------------------------------------------------------------------
Home of Martin Jørgensen - http://www.martinjoergensen.dk |
|
| Back to top |
|
|
Martin Jørgensen
Guest
|
| Posted:
Thu Oct 20, 2005 8:10 pm Post subject:
Re: export to vda file. |
|
|
Dave Ignaczak wrote:
| Quote: | I don't think you can export STL to VDA. I get the same result you get. You
need to start with the origianl file or an IGS file.
-snip- |
How come?
I assume I can't open the .stl file and save it as an iges and then
export it to .vda, can I?
I just don't understand what all those information in that about 100 kb
..stl file is doing there if it's not information about the geometry and
since Pro/e knows .vda I don't understand why it just can't "translate"
that information and save it?
The geometry looks *completely* fine to me, when I open it...
I assume pro/E can do the conversion from the original pro/E .part file
then - or would that also be a problem?
Med venlig hilsen / Best regards
Martin Jørgensen
--
---------------------------------------------------------------------------
Home of Martin Jørgensen - http://www.martinjoergensen.dk |
|
| Back to top |
|
|
Dave Ignaczak
Guest
|
| Posted:
Thu Oct 20, 2005 8:10 pm Post subject:
Re: export to vda file. |
|
|
I don't think you can export STL to VDA. I get the same result you get. You
need to start with the origianl file or an IGS file.
"Martin Jørgensen" <unoder.spam@spam.jay.net> wrote in message
news:435696e4$0$9189$edfadb0f@dread15.news.tele.dk...
| Quote: | Hi,
I need to export a stl/proe file into .vda file format. At my university
we have access to proe wildfire.
However, when I choose `save as` in the `file` menu, I only get a 2 kb
file which seems to only be the header... Can you reproduce this error,
because I get error mistakes after importing the file and ofcourse an stl
file of about 100 kb cant be exported to a 2 kb file and still have the
same data in it...
Who can help?
Med venlig hilsen / Best regards
Martin Jørgensen
--
---------------------------------------------------------------------------
Home of Martin Jørgensen - http://www.martinjoergensen.dk
|
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
|
| Back to top |
|
|
Martin Jørgensen
Guest
|
| Posted:
Thu Oct 20, 2005 8:10 pm Post subject:
Re: export to vda file. |
|
|
David Janes wrote:
| Quote: | "Martin Jørgensen" <unoder.spam@spam.jay.net> wrote in message
news:435696e4$0$9189$edfadb0f@dread15.news.tele.dk...
-snip-
If your questions are worth answering, they are worth putting some effort into
explaining your problem, clearly and completely. And, if you don't see the value
in making that effort, why would you be surprised when no one sees the value in
making the effort to reply.
|
However, if I draw a box or simple geometries myself I can see that I
can actually do a 7 kb .vda file. The problem is the conversion from my
..stl file which should be exported to .vda.
Might be that .vda is not good apropriate dealing with curvatures?
If its not possible, I would like an explanation?
Med venlig hilsen / Best regards
Martin Jørgensen
--
---------------------------------------------------------------------------
Home of Martin Jørgensen - http://www.martinjoergensen.dk |
|
| Back to top |
|
|
Dave Ignaczak
Guest
|
| Posted:
Fri Oct 21, 2005 8:10 pm Post subject:
Re: export to vda file. |
|
|
Martin,
The STL file is faceted to create a rough shape for prototyping. Unlike the
STL, the VDA (like IGS) does not break up surfaces into small triangles.
Exporting from an STL would not give you a good useable file like VDA or
IGS. But I would agree that if you want to do it, you should be able to.
Even tho you can shade the STL file it is not really solid. So that's why
Pro/E won't export it to VDA or IGS.
If you just want a VDA file to bring up and look at here's a way to do it
....
1. Import the STL file and save it as a Part file.
2. Export that Part as a Shrinkwrap file. In the "create shrinkwrap" menu
that pops up, select "faceted surface" and select the part. The higher the
quality you pick (1 - 10) the "smoother" it will look. But the file could
end up being huge depending on the number of facets in the STL file. Start
with 1 and see what you get. You're basically faceting an already faceted
surface.
3. Open the Shrinkwrap file and export it as VDA.
4. Then you can bring up the VDA.
Hopefully this is good enough for what you need at this point. If not you
need to start with a Part or IGS file. Something with non-faceted surfaces.
Dave
"Martin Jørgensen" <unoder.spam@spam.jay.net> wrote in message
news:4357f173$0$9193$edfadb0f@dread15.news.tele.dk...
| Quote: | Dave Ignaczak wrote:
I don't think you can export STL to VDA. I get the same result you get.
You need to start with the origianl file or an IGS file.
-snip-
How come?
I assume I can't open the .stl file and save it as an iges and then export
it to .vda, can I?
I just don't understand what all those information in that about 100 kb
.stl file is doing there if it's not information about the geometry and
since Pro/e knows .vda I don't understand why it just can't "translate"
that information and save it?
The geometry looks *completely* fine to me, when I open it...
I assume pro/E can do the conversion from the original pro/E .part file
then - or would that also be a problem?
Med venlig hilsen / Best regards
Martin Jørgensen
--
---------------------------------------------------------------------------
Home of Martin Jørgensen - http://www.martinjoergensen.dk
|
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
|
| Back to top |
|
|
Martin Jørgensen
Guest
|
| Posted:
Sat Oct 22, 2005 8:10 am Post subject:
Re: export to vda file. |
|
|
Dave Ignaczak wrote:
-snip-
| Quote: | If you just want a VDA file to bring up and look at here's a way to do it
...
1. Import the STL file and save it as a Part file.
2. Export that Part as a Shrinkwrap file. In the "create shrinkwrap" menu
that pops up, select "faceted surface" and select the part. The higher the
quality you pick (1 - 10) the "smoother" it will look. But the file could
end up being huge depending on the number of facets in the STL file. Start
with 1 and see what you get. You're basically faceting an already faceted
surface.
3. Open the Shrinkwrap file and export it as VDA.
4. Then you can bring up the VDA.
Hopefully this is good enough for what you need at this point. If not you
need to start with a Part or IGS file. Something with non-faceted surfaces.
|
Hey, thanks a lot for the comments and description of what to do... I
would never have figured that out. I now got myself a 313 kb VDA file,
although it's uglier than before.
Also, I still have problems importing the vda file (I get error and the
program crashes) but this might not be a pro/e issue at all.
Med venlig hilsen / Best regards
Martin Jørgensen
--
---------------------------------------------------------------------------
Home of Martin Jørgensen - http://www.martinjoergensen.dk |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in